Productos

DESCRIPCIÓN

Información básica

N º de Modelo.	01-270X
Tasa de aspiración de líquido	17 l/min.
Volumen de botella	4L
Paquete de transporte	1 unidad/paquete.
Marca comercial	BIOLOGIX
Origen	Ciudad de Changzhou, provincia de Jiangsu, China
Código hs	8421199090

Descripción del Producto

4L 0- 600 Sistema de Aspiración al Vacío SAFEVAC
Característica:

1. El sistema de aspiración al vacío SAFEVAC es ideal para la aspiración rápida y segura de líquidos peligrosos

   y su posterior disposición. Se usa ampliamente para aspirar medios de cultivos celulares, sobrenadantes después de la centrifugación y soluciones de lavado de placas de inmunoensayo, etc.

Características:

1. Bomba integrada con control de vacío ajustable
2. Conectores de cierre automático para instalación y desmontaje rápidos, prevención de goteos y contención de aerosoles
3. El sensor de nivel de líquido evita el desbordamiento
4. Boquillas, tubos y botellas de recogida de residuos esterilizables en autoclave
5. Asa resistente y desmontable para el transporte conveniente de la botella de recolección de desechos
6. Boquillas monocanal y multicanal y otras opciones de accesorios disponibles

Información sobre pedidos:

Nº de catálogo	Rango de vacío	Caudal de la bomba	Tasa de aspiración de líquido	Dimensiones [An. × Pr. × Al. mm]	Volumen de botella
01-270X	0 - 600 (ajustable)	15 l/min	17 l/min	180 × 240 × 450	4L

1. What are the main factors that influence the maximum centrifugal acceleration force?Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins. The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower. Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.2. What are autoclaving guidelines of plastics?To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.3. What are Biologix's Commitments to Quality? We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.